{"title":"SVC DE_AMY 1\/35 Engineer","description":"","products":[{"product_id":"thunder-model-tm35100-1-35-bergepanzer-38-hetzer-late-special-edition","title":"Bergepanzer 38 Hetzer (late) [special edition]","description":"\u003cp\u003eBergerpanzer 38(t) was a recovery vehicle based on Hetzer’s base, with lower open-top superstructure, manufactured by BMM company in Prague. The plans were approved in September 1944 and called for production of 170 vehicles until the end of 1944. In fact just 101 vehicles were built. To meet the production plans it was decided to convert 64 summer production´s Hetzers into armoured recovery vehicles, but it is unknown how many were actually converted. Production was much slower than plans, and total number of about 180 vehicles was finished until the end of the war.\u003cbr\u003e\nThe Bergepanzer was equipped with two-ton folding jib crane used to handle engines and other heavy components. Additionally the recovery vehicle was equipped with five-ton winch of Baumgarten company. The winch was driven by the vehicle´s engine through transmission system. At the end a blade was installed at the rear of the hull, but it is again unclear how many vehicles were equipped with it. There were also some development works to install the blade at the front of the vehicle, as seen in the company blueprints, but probably these plans were never realized.\u003c\/p\u003e\n\n \u003cp\u003eKit TM35100  Limited Bonus Edition\u003cbr\u003e\n- 400+ plastic parts (sprues A, B, C, 2xD, F, Z)\u003cbr\u003e\n  slide molded,  multi-side slide molded hull and body\u003cbr\u003e\n- bonus full detail engine compartment and interior \u003cbr\u003e\n- faithfully reproduced crane and winch \u003cbr\u003e\n- PE detail sheet, scale chain, additional bonus PE sheets with Skirts parts and Mudguards parts\u003cbr\u003e\n- PE color printed instruments\u003c\/p\u003e","brand":"Thunder Model","offers":[{"title":"Default Title","offer_id":51528040218891,"sku":"TM35100","price":53.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/thunder-model-tm35100-bergepanzer-38-hetzer-late-special-edition.jpg?v=1748502720"},{"product_id":"thunder-model-tm35101-1-35-bergepanzer-38-hetzer-late","title":"Bergepanzer 38 Hetzer (late)","description":"\u003cp\u003eBergerpanzer 38(t) was a recovery vehicle based on Hetzer’s base, with lower open-top superstructure, manufactured by BMM company in Prague. The plans were approved in September 1944 and called for production of 170 vehicles until the end of 1944. In fact just 101 vehicles were built. To meet the production plans it was decided to convert 64 summer production´s Hetzers into armoured recovery vehicles, but it is unknown how many were actually converted. Production was much slower than plans, and total number of about 180 vehicles was finished until the end of the war.\u003cbr\u003e\nThe Bergepanzer was equipped with two-ton folding jib crane used to handle engines and other heavy components. Additionally the recovery vehicle was equipped with five-ton winch of Baumgarten company. The winch was driven by the vehicle´s engine through transmission system. At the end a blade was installed at the rear of the hull, but it is again unclear how many vehicles were equipped with it. There were also some development works to install the blade at the front of the vehicle, as seen in the company blueprints, but probably these plans were never realized.\u003c\/p\u003e\n\n \u003cp\u003eKit TM35101 Standard edition\u003cbr\u003e\n- 350+ plastic parts (sprues A, B, C, 2xD, Z )\u003cbr\u003e\n  slide molded,  multi-side slide molded hull and body\u003cbr\u003e\n- faithfully reproduced crane and winch \u003cbr\u003e\n- PE detail sheet, scale chain\u003cbr\u003e\n- PE color printed instruments\u003c\/p\u003e","brand":"Thunder Model","offers":[{"title":"Default Title","offer_id":51528040251659,"sku":"TM35101","price":43.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/thunder-model-tm35101-bergepanzer-38-hetzer-late.jpg?v=1748502723"},{"product_id":"thunder-model-tm35102-1-35-bergepanzer-38-hetzer-early","title":"Bergepanzer 38 Hetzer (early)","description":"\u003cp\u003eBergerpanzer 38(t) was a recovery vehicle based on Hetzer’s base, with lower open-top superstructure, manufactured by BMM company in Prague. The plans were approved in September 1944 and called for production of 170 vehicles until the end of 1944. In fact just 101 vehicles were built. To meet the production plans it was decided to convert 64 summer production´s Hetzers into armoured recovery vehicles, but it is unknown how many were actually converted. Production was much slower than plans, and total number of about 180 vehicles was finished until the end of the war.\u003cbr\u003e\nThe Bergepanzer was equipped with two-ton folding jib crane used to handle engines and other heavy components. Additionally the recovery vehicle was equipped with five-ton winch of Baumgarten company (most of the Early Bergehetzers also had this winch installed to pull other vehicles stuck in mud, using a large pulley). The winch was driven by the vehicle´s engine through transmission system. At the end a blade was installed at the rear of the hull (only Late variant), but it is again unclear how many vehicles were equipped with it. There were also some development works to install the blade at the front of the vehicle, as seen in the company blueprints, but probably these plans were never realized.\u003c\/p\u003e\n\n\u003cp\u003eEarly Bergehetzer variant was mostly equipped with early type of road wheels and idler wheels, it had different towing eyes, the front armor was thinner than Late variant, its engine cover was early type without two additional small access hatches, with early type of exhaust muffler. The rear support blade was developed later and installed on the Late Bergehetzer variant only.\u003c\/p\u003e\n\n \u003cp\u003eKit TM35102 Standard edition\u003cbr\u003e\n- 370+ plastic parts (sprues A, B, C, 2xD, E )\u003cbr\u003e\n  slide molded,  multi-side slide molded hull and body\u003cbr\u003e\n- faithfully reproduced crane and winch\u003cbr\u003e\n- full interior \u003cbr\u003e\n- PE detail sheet, scale chain\u003cbr\u003e\n- PE color printed instruments\u003c\/p\u003e","brand":"Thunder Model","offers":[{"title":"Default Title","offer_id":51528040317195,"sku":"TM35102","price":43.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/thunder-model-tm35102-bergepanzer-38-hetzer-early.jpg?v=1748502727"},{"product_id":"thunder-model-tm35103-1-35-bergepanzer-38-hetzer-early-special-edition","title":"Bergepanzer 38 Hetzer (early) [special edition]","description":"\u003cp\u003eBergerpanzer 38(t) was a recovery vehicle based on Hetzer’s base, with lower open-top superstructure, manufactured by BMM company in Prague. The plans were approved in September 1944 and called for production of 170 vehicles until the end of 1944. In fact just 101 vehicles were built. To meet the production plans it was decided to convert 64 summer production´s Hetzers into armoured recovery vehicles, but it is unknown how many were actually converted. Production was much slower than plans, and total number of about 180 vehicles was finished until the end of the war.\u003cbr\u003e\nThe Bergepanzer was equipped with two-ton folding jib crane used to handle engines and other heavy components. Additionally the recovery vehicle was equipped with five-ton winch of Baumgarten company (most of the Early Bergehetzers also had this winch installed to pull other vehicles stuck in mud, using a large pulley). The winch was driven by the vehicle´s engine through transmission system. At the end a blade was installed at the rear of the hull (only Late variant), but it is again unclear how many vehicles were equipped with it. There were also some development works to install the blade at the front of the vehicle, as seen in the company blueprints, but probably these plans were never realized.\u003c\/p\u003e\n\n\u003cp\u003eEarly Bergehetzer variant was mostly equipped with early type of road wheels and idler wheels, it had different towing eyes, the front armor was thinner than Late variant, its engine cover was early type without two additional small access hatches, with early type of exhaust muffler. The rear support blade was developed later and installed on the Late Bergehetzer variant only.\u003c\/p\u003e\n\n \u003cp\u003eKit TM35103  Limited Bonus Edition\u003cbr\u003e\n- 420+ plastic parts (sprues A, B, C, 2xD, E, F )\u003cbr\u003e\n  slide molded,  multi-side slide molded hull and body\u003cbr\u003e\n- full interior\u003cbr\u003e\n- bonus full detail engine compartment \u003cbr\u003e\n- faithfully reproduced crane and winch \u003cbr\u003e\n- PE detail sheet, scale chain, additional bonus PE sheets with Skirts parts and Mudguards parts\u003cbr\u003e\n- PE color printed instruments\u003c\/p\u003e","brand":"Thunder Model","offers":[{"title":"Default Title","offer_id":51528040382731,"sku":"TM35103","price":53.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/thunder-model-tm35103-bergepanzer-38-hetzer-early-special-edition.jpg?v=1748502731"},{"product_id":"das-werk-35018-1-35-vk-45-01p-rammtiger","title":"VK 45.01(P) Rammtiger","description":"\u003cp\u003eProduct Details\u003c\/p\u003e\n\n    \u003cp\u003eHighly detailed static plastic model\u003cbr\u003e\n    One piece new superstructure hull\u003cbr\u003e\n    Workable suspension\u003cbr\u003e\n    Workable single track links\u003cbr\u003e\n    4 color profiles and markings provided\u003c\/p\u003e\n\n\n\u003cp\u003eHistory\u003c\/p\u003e\n\n\u003cp\u003eDo you want to destroy an old diorama in proper style? Why not with our new Rammtiger? Our 1:35 scale model is the first plastic model of this vehicle of the German Wehrmacht during World War II.\u003c\/p\u003e\n\n\u003cp\u003eThe Rammtiger was a proposed conversion of the VK 45.01 (P) chassis (used for the Elefant and Ferdinand tankhunter) into a heavily armoured ramming vehicle.\u003cbr\u003e\n3 superstructures were completed but their fate is unknown as the project was cancelled in 1943.\u003c\/p\u003e","brand":"Das Werk","offers":[{"title":"Default Title","offer_id":51250972066059,"sku":"35018","price":32.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/das-werk-35018-vk-45_01p-rammtiger.jpg?v=1748503043"},{"product_id":"das-werk-35030-1-35-sd-kfz-251-7-ausf-b","title":"Sd.Kfz. 251\/7 Ausf. B","description":"\u003cp\u003eProduct Details\u003c\/p\u003e\n\n    \u003cp\u003eHighly detailed static plastic model\u003cbr\u003e\n    Buildable as standard 251\/7 or with 2,8cm Panzerbüchse\u003cbr\u003e\n    Single track links\u003cbr\u003e\n    Four paint schemes \u0026amp; decal options\u003cbr\u003e\n    Photo-Etch-Parts for fine extra detail included\u003cbr\u003e\n    Detailed representation of interior\u003cbr\u003e\n    Detachable bridging elements\u003c\/p\u003e\n\n\u003cp\u003eIn cooperation with a well-known manufacturer, we present the best model of this vehicle in a new edition.\u003c\/p\u003e\n\n\u003cp\u003eHistory\u003c\/p\u003e\n\n\u003cp\u003eThis vehicle was specially designed to meet the needs of the pioneering troops of the German Wehrmacht. For example, a bench was removed to have more storage space for the pioneers' equipment and a temporary bridge was carried along.\u003c\/p\u003e\n\n\u003cp\u003eDecal \u0026amp; Marking Options\u003c\/p\u003e\n\n    \u003cp\u003e19. Panzerdivision, Eastern Front, February 1945\u003cbr\u003e\n    Unkown Unit, Ardennes, December 1944\u003c\/p\u003e\n\n    \u003cp\u003e21. Panzerdivision, Normandy, July 1944\u003cbr\u003e\n    246. Volksgrenadier-Division, Battle of Aachen, October 1944\u003c\/p\u003e","brand":"Das Werk","offers":[{"title":"Default Title","offer_id":51251198787851,"sku":"35030","price":41.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/das-werk-35030-sd_kfz_-2517-ausf_-b.jpg?v=1748503083"},{"product_id":"hobbyboss-84553-1-35-bergepanther-ausf-g","title":"Bergepanther Ausf. G","description":"\u003cp\u003ePanther is the common name of a medium tank fielded by Nazi Germany in World War II that served from mid-1943 to the end of the European war in 1945. The Panther's excellent combination of firepower, mobility, and protection served as a benchmark for other nations' late war and immediate post-war tank designs, and it is frequently regarded as one of the best tank designs of World War II.\u003c\/p\u003e\n\n\u003cp\u003eWhile sharing essentially the same engine as the Tiger I tank, it had better frontal armor, better gun penetration, was lighter overall and thus faster, and could handle rough terrain better than the Tigers. The tradeoff was weaker side armor; the Panther proved to be deadly in open country and shooting from long range, but vulnerable to close-quarters combat. Also, the 75 mm gun fired a slightly smaller shell than the Tiger's 88 mm gun, providing less high explosive firepower against infantry, though it was still quite effective.\u003c\/p\u003e\n\n    \u003cp\u003eThe Panther was also far cheaper to produce than the Tiger tanks, and only slightly more expensive than the Panzer IV, as its design came to fruition at the same time that the Reich Ministry of Armament and War Production was making great efforts to increase war production. Key elements of the Panther design, such as its armor, transmission and final drive, were compromises made specifically to improve production rates and address Germany's war shortages, whereas other elements such as its highly compact engine and its complex suspension system remained with their elegant but complicated engineering. The result was that Panther tank production was far higher than what was possible for the Tiger tanks, but not much higher than what had been accomplished with the Panzer IV. At the same time, the simplified final drive became the single major cause of breakdowns of the Panther tank, and was a problem that was never corrected.\u003c\/p\u003e","brand":"HobbyBoss","offers":[{"title":"Default Title","offer_id":51466458595595,"sku":"84553","price":60.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/hobbyboss-84553-bergepanther-ausf_-g.jpg?v=1749105494"},{"product_id":"hobbyboss-84554-1-35-bergepanther-ausf-g-late","title":"Bergepanther Ausf. G (late)","description":"\u003cp\u003ePanther is the common name of a medium tank fielded by Nazi Germany in World War II that served from mid-1943 to the end of the European war in 1945. The Panther's excellent combination of firepower, mobility, and protection served as a benchmark for other nations' late war and immediate post-war tank designs, and it is frequently regarded as one of the best tank designs of World War II.\u003c\/p\u003e\n\n\u003cp\u003eWhile sharing essentially the same engine as the Tiger I tank, it had better frontal armor, better gun penetration, was lighter overall and thus faster, and could handle rough terrain better than the Tigers. The tradeoff was weaker side armor; the Panther proved to be deadly in open country and shooting from long range, but vulnerable to close-quarters combat. Also, the 75 mm gun fired a slightly smaller shell than the Tiger's 88 mm gun, providing less high explosive firepower against infantry, though it was still quite effective.\u003c\/p\u003e\n\n     \u003cp\u003eThe Panther was also far cheaper to produce than the Tiger tanks, and only slightly more expensive than the Panzer IV, as its design came to fruition at the same time that the Reich Ministry of Armament and War Production was making great efforts to increase war production. Key elements of the Panther design, such as its armor, transmission and final drive, were compromises made specifically to improve production rates and address Germany's war shortages, whereas other elements such as its highly compact engine and its complex suspension system remained with their elegant but complicated engineering. The result was that Panther tank production was far higher than what was possible for the Tiger tanks, but not much higher than what had been accomplished with the Panzer IV. At the same time, the simplified final drive became the single major cause of breakdowns of the Panther tank, and was a problem that was never corrected.\u003c\/p\u003e","brand":"HobbyBoss","offers":[{"title":"Default Title","offer_id":51466458923275,"sku":"84554","price":60.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/hobbyboss-84554-bergepanther-ausf_-g-late.jpg?v=1749105501"},{"product_id":"miniart-35359-1-35-gaz-03-30-werkstattkraftwagen","title":"GAZ-03-30 Werkstattkraftwagen","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Miniart","offers":[{"title":"Default Title","offer_id":51495882621195,"sku":"35359","price":49.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/miniart-gaz-03-30-werkstattkraftwagen-35359.jpg?v=1749122423"},{"product_id":"icm-35343-1-35-prost-between-battles-on-bergepanther","title":"‘Prost!’ Between Battles on Bergepanther","description":"\u003cp\u003eWWII German Tankmen with Bergepanther\u003c\/p\u003e\n\n\u003cp\u003eThe harsh living conditions during the fighting and the constant nervous tension and stress experienced by most Wehrmacht soldiers necessitated some kind of mental relief. One of these ways was to drink alcohol. In his memoirs, former Wehrmacht soldier Guy Sayer noted: “At the front, there are as many vodka, schnapps, and liqueurs as there are machine guns. It’s easier to make a hero out of anyone.” Alcohol could also reduce the pain of the wounded. The main alcoholic drink in the Wehrmacht was schnapps, and German soldiers, especially tankers, could also be issued liqueurs. Officers often had French trophy cognacs or wines, which were captured in such large quantities that they were consumed even when surrounded, as was the case, for example, near Stalingrad in the winter of 1943. However, it was very often a bad omen to distribute alcohol to troops, as it often happened before major battles and portended heavy casualties at the front.\u003c\/p\u003e","brand":"ICM","offers":[{"title":"Default Title","offer_id":51497286762763,"sku":"35343","price":37.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/icm-35343-prost-between-battles-on-bergepanther-1.jpg?v=1751310157"},{"product_id":"icm-ds3516-1-35-german-recovery-hold-the-rope-willi","title":"German Recovery ‘Hold the Rope, Willi!’","description":"\u003cp\u003e‘Hold the rope, Willie!’\u003c\/p\u003e\n\n\u003cp\u003eThe Pz.Kpfw.V Panther tank is considered as one of the best tanks of WWII. Reliable armor and powerful firepower made this tank a dangerous enemy on the battlefield. On its basis, various combat vehicles were produced, including the Armored Recovery Vehicle Bergepanther. It was first used during the Battle of Kursk in 1943. Bergepanther could perform the functions of a tank tractor, a mobile tank workshop or a mobile electric generator. Its armor protection allowed to evacuate damaged tanks under enemy fire. Air cover of combat units in Wehrmacht units was carried out with various types of weapons, ranging from machine guns to special heavy guns.\u003c\/p\u003e","brand":"ICM","offers":[{"title":"Default Title","offer_id":51497375301899,"sku":"DS3516","price":76.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/icm-ds3516-german-recovery-hold-the-rope-willi-1.jpg?v=1751311012"},{"product_id":"meng-model-ss-001-1-35-alkett-vs-kfz-617-minenraumer","title":"Alkett Vs.Kfz. 617 Minenräumer","description":"\u003cp\u003eVskfz 617 is a German mysterious weapon which used in World War II and has an unknown story. The strong and gigantic wheels are used for the detonation of mines to obtain a cleared access path for German infantry and AFVs. The vehicle has a turret of Panzer I tank which is equipped with mg-34 machine guns ensuring the close defense of the machine. It is said that VsKfz 617 had been through the battle of Kursk. According to the result of soviet texts, the vehicle is not a good minesweeper.KIT INFO\u003c\/p\u003e\n\n\u003cp\u003eHighly percussive VsKfz 617 minesweeper kit in scale 1\/35, its length, width and altitude are 188mm, 91.5mm and 81.5mm respectively. The shoes which have the metal blocks inside are included in the box. The three wheels can be moved and turned freely. Separate molding links reproduce the appearance of real vehicle precisely so as to make the wheel-making easier.\u003c\/p\u003e","brand":"Meng Model","offers":[{"title":"Default Title","offer_id":51504763961611,"sku":"SS-001","price":58.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/meng-model-ss-001-alkett-vs_kfz_-617-minenraumer-1.jpg?v=1751307912"},{"product_id":"trumpeter-00389-1-35-bergepanzer-iv","title":"Bergepanzer IV","description":"\u003cp\u003eThe Panzer IV was the workhorse of the German tank corps, being produced and used in all theatres of combat throughout the war. The design was upgraded repeatedly to deal with the increasing threats from enemy forces. Bergepanzer IV : A recovery vehicle, essentially a turretless Panzer IV chassis fitted with a crane. In May 1944 Bergepanzer 36 stared being built.\u003c\/p\u003e","brand":"Trumpeter","offers":[{"title":"Default Title","offer_id":51507482231051,"sku":"00389","price":44.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/trumpeter-00389-bergepanzer-iv.jpg?v=1749136247"},{"product_id":"dragon-6399-1-35-bergepanzer-38-hetzer-with-2cm-flak-38","title":"Bergepanzer 38 Hetzer with 2cm Flak 38","description":"\u003cp\u003eDragon’s 1\/35 scale Hetzer family is being enriched with three new exotic kits. Here is the first one, a Jagdpanzer 38(t) mit 2cm FlaK 38. As WWII wore on, German engineers attempted all sorts of conversions of existing armored vehicles to help shore up the war effort. The Czech-built Jagdpanzer 38(t) was one chassis commonly used, and an antiaircraft vehicle was one version that was planned. As the name Jagdpanzer 38(t) mit 2cm FlaK 38 signifies, it mounted a 20mm cannon.\u003c\/p\u003e\n\n\u003cp\u003eThe vehicle kit incorporates brand new elements such as an upper hull accurately built to contemporary standards. Also new are the engine deck and road wheels. As an open-topped vehicle, interior detail is visible in the fighting compartment, with a new firewall and mount for the FlaK 38. Photo-etched parts are included for refining details. Besides, it's option to build such a vehicle converted on either a normal Hetzer or a Bergepanzer 38(t). Indeed, the Jagdpanzer 38(t) mit 2cm FlaK 38 is an exotic beast that has never before been available in plastic. Now Dragon has made it incredibly convenient for modelers to produce their very own Hetzer-based antiaircraft vehicle.\u003c\/p\u003e","brand":"Dragon","offers":[{"title":"Default Title","offer_id":51521841201419,"sku":"6399","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/dragon-hk-6399-bergepanzer-38-hetzer-with-2cm-flak-38.jpg?v=1749144135"},{"product_id":"italeri-6764-1-35-bergetiger","title":"Bergetiger","description":"\u003cp\u003eWhen the Allied forces captured a modified Tiger I, adapted to serve in a technical and logistical support role for front-line armoured troops, they named it 'Bergetiger', similarly to how they had designated recovery vehicles based on the Panther and Panzer IV tanks. It was essentially a Tiger I, identical in hull and tracks, and above all in its heavy armour, stripped of its main gun and equipped with a crane suitable for towing other tanks and lifting heavy loads. It was also fitted with spare parts, equipment for repairing other armoured vehicles, and reserve ammunition. There are no official production statistics, but it is believed that several 'Bergetiger' units were built directly at the front by Wehrmacht field workshops.\u003c\/p\u003e\n\n    \u003cp\u003eScale is 1:35\u003cbr\u003e\n    Size of the model is 18cm\u003cbr\u003e\n    With link \u0026amp; length, gluable rubber tracks\u003cbr\u003e\n    Ideal for German World War II dioramas\u003cbr\u003e\n    A unique and original version of the famous Tiger tank\u003c\/p\u003e","brand":"Italeri","offers":[{"title":"Default Title","offer_id":51919454601483,"sku":"6764","price":30.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/6764_02.jpg?v=1762094583"},{"product_id":"ibg-35029-1-35-scammell-pioneer-sv2s","title":"Scammell Pioneer SV2S","description":"\u003cp\u003eThe Scammell Pioneer was a british 6×4 tractor used in the Second World War as recovery vehicle, artillery tractor and tank transporter. All Pioneers in British Army were equipped with a 102 hp Gardner 6 cylinder diesel engine, rear-wheels drive and a power winch. Introduced in 1935, the version R100 heavy artillery tractor was used in World War II to tow medium and heavy artillery. 980 Pioneers R100 were produced to the end of the war. From 1936 the British Army began to receive 43 Pioneers heavy recovery vehicles SV1S. Many of these SV1S and R100 vehicles were lost in France in June 1940, destroyed by the withdrawing troops or captured by the Germans. The version SV2S had a redesigned crane with greater lifting height and was introduced in 1938. Total of 1,975 SV2S were built. Delivery of a tank transporter began in 1937. This variant was equipped with a longer chassis for an extended cab to accommodate the tank crew. 459 of Scammels in this variant were produced.\u003c\/p\u003e","brand":"IBG","offers":[{"title":"Default Title","offer_id":52774110298379,"sku":"35029","price":38.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/35029.jpg?v=1766171382"},{"product_id":"miniart-35491-1-35-werkstattkraftwagen-auf-rso-01","title":"Werkstattkraftwagen Auf RSO\/01","description":"\u003cp\u003eWerkstattkraftwagen auf RSO\/01 was a German mobile workshop based on the RSO tracked tractor, developed to support field repairs in difficult terrain. The tracked chassis provided excellent cross-country mobility, while the enclosed workshop body allowed maintenance work close to the front line.\u003c\/p\u003e\n\n    \u003cp\u003eHighly detailed plastic model\u003cbr\u003e\n    Detailed workshop interior\u003cbr\u003e\n    Photo-etched parts included\u003cbr\u003e\n    Decals for multiple marking options\u003c\/p\u003e","brand":"Miniart","offers":[{"title":"Default Title","offer_id":53059930292491,"sku":"35491","price":47.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/1809\/4091\/files\/632312326_1339691108198421_3128395984360867676_n.jpg?v=1776610817"}],"url":"https:\/\/anglia-models.com\/collections\/svc-de_amy-1-35-engineer.oembed","provider":"Anglia Models","version":"1.0","type":"link"}